vega Kitchenware Oil

General Features:

• Tested & certified according to LFGB standard for food contact
• Odorless and does not contain VOC
• Preserves and revives the natural appearance of wood
• Easily applied by wiping
• Does not contain heavy metals and lead
• Environmentally friendly
• Ready to use

Packaging Size: 175 ml., 1 L.

Where To Use:  Wooden kitchenware

Surface Preparation:

• Remove any dirt, oil and wood dust from the surface.
• Do not use products like cellulose or polyurethane filler or primer before the application of the product.

Untreated Wooden Surfaces: Sand the surface according to the desired surface appearance. I.e., it is recommended to sand with #80/120 for a natural finish and #180/220 for a smoother texture. Thoroughly clean the generated dust from the surface. Remove the remaining dust with a damp cloth and wait until completely dry.

Oiled Wooden Surfaces:

• Clean the wood surface thoroughly with warm water and avoid any dirt or oil. After cleaning, let the wood dry for at least 8 hours.
• Old Uncoated Wooden Surfaces:
• Clean the wood surface thoroughly with warm water and avoid any dirt or oil. After cleaning, let the wood dry for at least 8 hours.

Varnished Wooden Surfaces:

• Do not apply the product directly on pre-coated surfaces.
• Remove the old varnish from the surface completely with a sandpaper. Remove any dirt, oil, wood dust and old varnish residues from the surface.
• Sand the surface according to the desired surface appearance. I.e., it is recommended to sand with #120 for a natural finish and #180 to 300 for a smoother texture.
• Thoroughly clean the generated dust and remove it completely from the surface.
• Remove the remaining dust with a damp cloth and wait until completely dry.

Application:

• Shake well the product thoroughly before use and check its homogeneity. Repeat this process during the application.
• Apply generously on all sides of the wood with a lint-free cloth or paper towel.
• Leave the product on the surface for 30 minutes to be absorbed by the wood, then remove the excess oil on the surface with a lint-free cloth or paper towel until you get a feeling of dryness.
• The surface is ready to use after 24 hours.
• If a more saturated surface appearance is desired, a second coat can be applied by waiting 24 hours.
• When it is observed that the surface dries or starts to absorb water after a certain period of use, the application should be repeated for maintenance purposes.

Instructions:

• FOR INTERIOR USE ONLY.
• Do not apply products such as nitro, polyurethane basecoats or primers before Kitchenware Oil.
• Keep product closed when not in use.
• The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
• The moisture content of the wood should be below 12%.
• The area should be ventilated during and after the application to promote the drying.
• The product should not be applied when the weather or surface temperature is below 10°C.
• The oiled kitchenware should not be cleaned with ammonia containing cleaning materials.
• The product should be stored at temperatures between 5°C to 35°C.
• Painting tools should be cleaned with soap and plenty of warm water or mineral spirits after application.

Safety Precautions:

• KEEP OUT OF REACH OF CHILDREN.
• Do not transfer contents to other containers for storage.
• Do not use empty cans for other purposes.
• FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
• Dispose of contents/cans in accordance with national regulations.
• Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.

Certificates: 

• EN71-3 Toy Safety Certificate
• LFGB Food Contact Certificate