vega Hardwax Oil

General Features:

• One-coat protection
• Non-film forming
• Enhance the natural beauty of wood
• High abrasion and scratch resistance
• No overlaps marking
• Water repellent
• Does not contain heavy metals and lead
• Environmentally friendly

Packaging Size: 500 ml., 2,5 L., 15 L. (Upon request)

Where To Use:

• Wooden floors
• Suitable for all interior wood
• Wooden table, chairs, kitchen benches and furniture
• Previously oiled interior woods and furniture

Surface Preparation:

• Remove any dirt, oil and wood dust from the surface.
• Do not use products like cellulose or polyurethane filler or primer before the application of the product. As a filler, mix the wood dust with the product and fill all gaps and joints of the parquet. Clean the excess paste after it has dried out.

Untreated Wooden Surfaces:

• Sand the surface according to the desired surface appearance. I.e., it is recommended to sand with #80/120 for a natural finish and #180-300 for a smoother texture.
• Thoroughly clean the generated dust and remove it completely from the surface with a vacuum cleaner. Remove the remaining dust with a damp cloth.

Oiled Wooden Surfaces: Remove the remaining dust with a damp cloth.

Old Uncoated Wooden Surfaces:

• Sand the weathered surface according to the desired surface appearance.
• I.e., it is recommended to sand with #80/120 for a natural finish and #180-300 for a smoother texture. Thoroughly clean the generated dust and remove it completely from the surface with a vacuum cleaner. Remove the remaining dust with a damp cloth.
• Varnished Wooden Surfaces:
• Do not apply the product directly on pre-coated surfaces. Remove the old varnish from the parquet completely with a scraping machine. Remove any dirt, oil, wood dust and old varnish residues from the surface. Sand the surface according to the desired surface appearance. I.e., it is recommended to sand with #80/120 for a natural finish and #180-300 for a smoother texture.
• Thoroughly clean the generated dust and remove it completely from the surface with a vacuum cleaner. Remove the remaining dust with a damp cloth.

Application:

• Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
• Manual Application:
• Apply the mixture along the edges for floorings. Apply the product in 1 coat by a brush or cloth in zones of 5 m2 and leave 15 minutes for penetrating the oil. Thoroughly remove the excess oil by cloth within 15 minutes per zone till surface feels dry.
• Apply in the direction of wood grain to get a homogeneous look.
• Machine Application:
• Apply the mixture along the edges for floorings. Use polishing machine with red buffer pad for leveling the product to the surface. Pour a quantity product to surface or buffer pad’s hollow and apply in zones of 5-10 m2. Leave 15 minutes for penetrating the oil.
• Thoroughly remove the excess oil by white buffer pad within 15 minutes per zone till surface feels dry. Apply in the direction of wood grain to get a homogeneous look. The treated surface may be stepped on after 24 hours. Allow 7 days for full cure.

Instructions:

• FOR INTERIOR USE ONLY.
• Do not apply products such as nitro, polyurethane basecoats or primers before VEGA Hardwax Oil.
• Keep product closed when not in use.
• The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
• The moisture content of the wood should be below 12%.
• The area should be ventilated during and after the application to promote the drying.
• The product should not be applied when the weather or surface temperature is below 10°C.
• The floor should not be cleaned with ammonia containing cleaning materials.
• The varnished floor can be stepped on after 24 hours. Allow 7 days before spreading carpet and/or cleaning. The product should be stored at temperatures between 5°C to 35°C.
• Painting tools should be cleaned with soap and plenty of warm water and mineral spirits after application.

Safety Precautions:

• OIL SOAKED FABRIC CAN BE SELF IGNITING.
• FABRICS SHOULD BE COMPLETELY SOAKED IN WATER AND DISPOSED OF AFTER BEING USED.
• USE WITH ADEQUATE VENTILATION.
• KEEP OUT OF REACH OF CHILDREN.
• Do not transfer contents to other containers for storage.
• Do not use empty cans for other purposes.
• To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
• Avoid contact with eyes and skin.
• Wash hands after using.
• FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
• Dispose of contents/cans in accordance with national regulations.
• Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.

Certificates: EN71-3 Toy Safety Certificate