vega exterior thermooil

General Features:

• Beautiful natural finish
• non film forming
• Increased resistance to UV
• Easy maintenance of local patches
• Water repellent
• Reduces splintering
• Lead-free
• Ready to use

Packaging Size: 2,5 L., 15 L.*

Where To Use:  Hardwoods, ThermoWood®, decks and garden furniture

Surface Preparation:

• Remove any dirt, oil and wood dust from the surface.
• New Wood Surfaces:
• Sand the surface with sandpaper #150/180.
• Thoroughly clean the generated dust.

Old Uncoated Wood Surfaces:

• Sand the weathered surface with sandpaper #150/180 or restore wood surface using VEGA Deck Restorer.
• Coated Wood Surfaces:
• Do not apply the product directly on pre-coated surfaces.
• Remove the old paint/varnish from the surface completely with a sanding machine.
• Thoroughly clean the generated dust.

Application:

• The product is ready to use and does not require thinning.
• Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
• Garden furniture
• Apply the product in 1 coat by a brush, cloth, roller or dipping and remove the excess oil by brush for the best result.
• Decks
• Apply the product by brush, cloth, roller or dipping in 1 or 2 coats according to absorption of the wood and remove the excess oil by brush for the best result.
• Wait at least 24 hours between coat.
• Apply in the direction of wood to get a homogeneous look.
• The treated surfaces may be stepped on after 24 hours.

Maintenance (when the same product had been used before):

• Do not apply the product directly on pre-coated surfaces.
• Clean the wood surface completely from dirt and oil and perform a slight sanding.
• Thoroughly clean the generated dust.
• Repeat same process as described in “Application”.
• Maintenance should be repeated every season.

Instructions:

• FOR EXTERIOR USE ONLY.
• Keep product closed when not in use.
• The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
• The moisture content of the wood should be max. 20%.
• Do not apply the product under direct sunlight or rain.
• The product should be stored at temperatures between 5°C to 35°C.
• Painting tools should be cleaned with mineral spirits after the application.

Safety Precautions:

• OIL SOAKED FABRIC CAN BE SELF IGNITING. FABRICS SHOULD BE COMPLETELY SOAKED IN WATER AND DISPOSED OF AFTER BEING USED.
• USE WITH ADEQUATE VENTILATION.
• KEEP OUT OF REACH OF CHILDREN.
• Do not transfer contents to other containers for storage.
• Do not use empty cans for other purposes.
• To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
• Avoid contact with eyes and skin.
• Wash hands after using.
• Dispose of contents/cans in accordance with national regulations.
• Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.

Certificates: EN71-3 Toy Safety Certificate