vega Aqua opaque paint

General Features: Water repellent, Allows wood to breathe, Opaque wood finish, Durable and resistant to exterior weather conditions, UV resistant, Lead-free, Does not crack, peel or blister, Environmentally friendly, Ready to use

Packaging Size: 1 L., 2,5 L., 5 L., 15 L.*

Where To Use: Suitable for all exterior wood except floors, Doors and window joinery, Shutters, Claddings, Fences, Pergolas, Balcony railings, Roof fringes, Restorations

Surface Preparation:

• Remove any dirt, oil and wood dust from the surface.
• Apply Acrylic Filling Paste on nailheads, joint points, capillary cracks and depths below 3 mm.

New Wood Surfaces:

• Sand the surface with sandpaper #80/120. Thoroughly clean the generated dust.
• Old Uncoated Wood Surfaces:
• Sand the weathered surface with sandpaper #80/120. Thoroughly clean the generated dust.

Coated Wood Surfaces:

• Do not apply the product directly on pre-coated surfaces. Remove the old paint/varnish from the surface completely with a sandpaper. Thoroughly clean the generated dust.
• The application of Aqua Universal Primer is recommended before Breather Paint, having the function of a barrier and preventing the yellowing of the last coat stain particularly at exotic and resin containing woods.
• If not, the surface of wood containing resins and natural oils should be cleaned with a cloth soaked in cellulosic thinner and dried out before the application.

Application:

• The product is ready to use and does not require thinning. (At very high temperatures 10% drinking water may be added).
• Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
• Apply the product in 2 coats by brush and wait 16 hours between coats.
• Perform a slight sanding with sandpaper #180/220 between coats.
• Wait 16 hours for complete dry.

Maintenance (when the same product had been used before):

• FOR EXTERIOR USE ONLY.
• NOT SUITABLE FOR FLOORINGS.
• Keep product closed when not in use.
• The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
• The moisture content of the wood should be max. 20%.
• Do not apply the product under direct sunlight or rain.
• Do not apply linseed oil, basecoat/primer, yacht varnish before or after Aqua Breather Paint applied surfaces.
• To provide a long lifetime protection against decay, apply Timbercare Aqua on untreated softwoods and wait 24 hours before applying Aqua Breather Paint.
• The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
• Painting tools should be cleaned with soap and plenty of warm water after application.

Instructions:

• FOR EXTERIOR USE ONLY. NOT SUITABLE FOR FLOORINGS.
• Keep product closed when not in use. The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
• The moisture content of the wood should be max. 20%.
• Do not apply the product under direct sunlight or rain.

Safety Precautions:

• USE WITH ADEQUATE VENTILATION.
• KEEP OUT OF REACH OF CHILDREN.
• Do not transfer contents to other containers for storage.
• Do not use empty cans for other purposes.
• To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
• Avoid contact with eyes and skin.
• Wash hands after using.
• FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
• Dispose of contents/cans in accordance with national regulations.
• Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.

Certificates: EN71-3 Toy Safety Certificate