Aqua Industrial Varnish

General Features: Transparent, Water repellent, Allows wood to breathe, UV resistant if used with HD Series Colorants, Thixotropic (can be applied vertically), Does not crack, peel or blister, Elastic, Child safe (EN 71-3 Certified), Environmentally friendly, Ready to use

Packaging Size: 15 L.

Where To Use: Suitable for all exterior wood except floors, Doors and window joinery, Shutters,, Roof fringes

Surface Preparation: Before applying the product, wait 4-6 hours for Hickson Decor® Aqua Decorative Colorant applied surface to dry.

Application:

The product is ready to use and does not require thinning. Before use, stir the product thoroughly with a stick or spatula until it reaches the can’s bottom and check its homogeneity. Repeat this process during the application. Apply the product in 2 coats by brush (VA 1030) or spray gun (VA 1130 / 2,5-3 mm nozzle, min. 3 atm pressure) on Hickson Decor® Aqua Decorative Colorant applied surface without sanding (wet on wet) and wait 1,5-2 hours between coats. For any reason, if 3 hours exceeded between coats, wait 24 hours and sand the surface with #220/240 sandpaper before applying the second coat. Wait 24 hours for complete dry. For a better surface appearance and performance, 24 hours should be waited after the first coat application, and then the second coat should be applied by sanding the first coat with 220/240 sandpaper.

Maintenance (when the same product had been used before)::

• Do not apply the product directly on pre-coated surfaces.
• Clean the wood surface entirely from dirt and oil and perform a light sanding.
• Thoroughly clean the generated dust.
• Repeat the same process as described in Application with 1 or 2 coats depending on weathering.
• Inspect annually and maintain as required.

Instructions:

• FOR EXTERIOR USE ONLY.  NOT SUITABLE FOR FLOORINGS.
• To achieve UV protection, the product must be applied on Hickson Decor® Aqua Decorative Colorant.
• Keep product closed when not in use.
• The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
• The moisture content of the wood should be a max of 20%.
• Do not apply the product under direct sunlight or rain.
• Do not apply linseed oil, basecoat/primer, yacht varnish before or after Hickson Decor® Aqua Industrial Varnish applied surfaces.
• Wait 72 hours before packaging coated/finished goods.
• The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
• Painting tools should be cleaned with soap and plenty of warm water after application.

Safety Precautions:

• USE WITH ADEQUATE VENTILATION. KEEP OUT OF REACH OF CHILDREN.
• Do not transfer contents to other containers for storage.
• Do not use empty cans for other purposes.
• To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. Avoid contact with eyes and skin. Wash hands after using.
• If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
• Dispose of contents/cans per national regulations.
• Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.

Certificates: EN71-3 Toy Safety Certificate