General Features: Clear, does not change the surface appearance, Non film forming, Prevents frost damage with high water repellency, Protects the surface from rain, dust and Reduces chalking, Allow surface to breathe, Ready to use
Packaging Size: 5 L., 15 L.
Where To Use: Cement, concrete, slate, Clinker brick, briquet, terracotta, limestone, pumice stone, Unpolished absorbent natural and unnatural stones, Historical restorations
Surface Preparation:
- Remove any dirt and dust from the surface.
- If exists; clear the surface from oil, rust, mold or moss completely.
- Repair cracks and loose parts on the surface.
- Do not apply the product on pre-coated surfaces.
- Allow the wet surface to dry completely before applying the product.
- Apply the product in 2 coats by brush or roller and wait 1,5-2 hours between coats.
- Perform slight sanding with sandpaper #180/220 between coats.
- Wait 24 hours for complete dry.
- Apply in the direction of wood grain to get a homogeneous look.
- The area should be ventilated during and after the application to promote the drying.
Application:
- The product is ready to use and does not require thinning.
- Stir the product thoroughly before use and check its homogeneity.
- Apply the product in 2 coats by a brush, roller or spraying. Apply the 2nd coat before 1st coat dries (wet on wet).
- Wait 24 hours for complete dry.
- If it rains during application, cover the applied surface and keep it closed until completely dries.
Instructions:
- FOR EXTERIOR USE ONLY.
- NOT SUITABLE FOR FLOORINGS.
- Keep product closed when not in use.
- The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
- Do not apply the product under direct sunlight or rain.
- The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
- Painting tools should be cleaned with soap and plenty of warm water after application.
Safety Precautions:
- USE WITH ADEQUATE VENTILATION. KEEP OUT OF REACH OF CHILDREN.
- Do not transfer contents to other containers for storage.
- Do not use empty cans for other purposes.
- To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and dry-ing.
- Avoid contact with eyes and skin.
- Wash hands after using.
- FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
- Dispose of contents/cans in accordance with national regulations.
- Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
Certificates: EN71-3 Toy Safety Certificate


Reviews
There are no reviews yet.