vega Hybrid exterior Oil

General Features:

• Beautiful natural finish
• Does not cause darkening on ThermoWood®
• Penetrates deeply and nourishes the wood
• Non-film forming
• One coat protection
• Low odour
• Fast drying
• Water repellent
• Easy application
• Increased resistance to UV
• Child safe (EN 71-3 Certified)
• Ready to use

Packaging Size: 15 L.

Where To Use:  Fences, Decks, Garden furniture, Pergolas, Claddings, ThermoWood® wooden surfaces

Surface Preparation: Remove any dirt, oil and wood dust from the surface.

New Wood Surfaces:

• Sand the surface with sandpaper #80/120.
• Thoroughly clean the generated dust.

Old Uncoated Wood Surfaces:

• Sand the weathered surface with sandpaper #150/180 or restore wood surface using Deck Restorer.
• Coated Wood Surfaces:
• Do not apply the product directly on pre-coated surfaces.
• Remove the old paint/varnish from the surface completely with a sanding machine.
• Thoroughly clean the generated dust.

Application:

• The product is ready to use and does not require thinning.
• Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
• Apply the product in 1 coat by a brush or roller and remove the excess oil by brush for the best result.
• Apply in the direction of wood to get a homogeneous look.
• The treated surfaces may be stepped on after 24 hours.

Maintenance (when the same product had been used before):

• Do not apply the product directly on pre-coated surfaces.
• Clean the wood surface completely from dirt and oil and perform a slight sanding.
• Thoroughly clean the generated dust.
• Repeat same process as described in “Application”.
• Inspect annually and maintain as required.

Instructions:

• Keep product closed when not in use.
• The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.
• The moisture content of the wood should be max. 20%.
• Do not apply the product under direct sunlight or rain.
• Do not apply linseed oil, basecoat/primer, yacht varnish before or after applied surfaces.
• The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
• Painting tools should be cleaned with soap and plenty of warm water after application.

Safety Precautions:

• USE WITH ADEQUATE VENTILATION.
• KEEP OUT OF REACH OF CHILDREN
• Do not transfer contents to other containers for storage
• Do not use empty cans for other purposes.
• To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
• Avoid contact with eyes and skin. Wash hands after using.
• FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists.
• If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
• Dispose of contents/cans in accordance with national regulations.
• Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.

Certificates:  EN71-3 Toy Safety Certificate