General Features: Natural look, Applied by brush/cloth/dipping, Lead-free, Environmentally friendly, Ready to use
Packaging Size: 0,750 L., 2,5 L.
Where To Use:
- Suitable for interior/exterior wood
- Doors and window joinery
- Shutters
- Claddings
- Fences
- Pergolas
- Balcony railings
- Roof fringes
- Interior wooden floorings
- Panels
- Wooden ceilings
Surface Preparation: Remove any dirt, oil and wood dust from the surface.
New Wood Surfaces: Sand the surface with sandpaper #80/120. Thoroughly clean the generated dust.
Old Uncoated Wood Surfaces: Sand the weathered surface with sandpaper #80/120. Thoroughly clean the generated dust
Coated Wood Surfaces: Do not apply the product on pre-coated surfaces. Remove the old paint/varnish from the surface completely with a sandpaper. Thoroughly clean the generated dust.varnish from the
Application:
- The product is ready to use and does not require thinning.
- Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
- Apply the product in 1 coat by brush, cloth or dipping and wait 4-6 hours for complete dry.
- Apply in the direction of wood grain to get a homogeneous look
- For exterior use UV protection and decorative finish, apply Prime Industrial Varnish or Prime Wood Stain.
Maintenance (when the same product had been used before):
- Do not apply the product on pre-coated surfaces.
- Remove the old stain/varnish from the surface completely with a sandpaper.
- Thoroughly clean the generated dust.
- Repeat same process as described in “Application”.
- Inspect annually and maintain as required.
Instructions:
- Do not apply the product on pre-coated surfaces.
- Remove the old stain/varnish from the surface completely with a sandpaper.
- Thoroughly clean the generated dust.
- Repeat same process as described in “Application”.
- Inspect annually and maintain as required.
Safety Precautions:
- USE WITH ADEQUATE VENTILATION.
- KEEP OUT OF REACH OF CHILDREN.
- Do not transfer contents to other containers for storage.
- Do not use empty plastic cans for other purposes.
- To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
- Avoid contact with eyes and skin.
- Wash hands after using.
- FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
- Dispose of contents/plastic cans in accordance with national regulations.
- Please refer to the Safety Data Sheet (SDS) of the product for health and safety information

Reviews
There are no reviews yet.