VEGA Woodcare

General Features:

Easy application by brush, Clear, Odorless, Complies with European Norms, Environmentally friendly, Ready to use

Packaging Size: 1 L, 5 L, 20 L

Where To Use:

Exterior softwoods to be painted above ground level

Surface Preparation:

Timber surface must be completely clean and moisture content of the wood should be below 20%.

Application:

• The product is ready to use and does not require thinning.
• Apply the product on timber by brush until it gets completely wet.
• Wait 24 hours for complete dry before coating.

Instructions:

• FOR INTERIOR / EXTERIOR USE.
• Keep product closed when not in use.
• The general application temperature of the product is between 15oC to 25oC at a relative
•  humidity range of 40-65%.
• The moisture content of the wood should be max. 20%.
• The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
• Painting tools should be cleaned with soap and plenty of warm water after application.

Safety Precautions:

• USE WITH ADEQUATE VENTILATION.
• KEEP OUT OF REACH OF CHILDREN.
• Do not transfer contents to other containers for storage.
• Do not use empty plastic cans for other purposes.
• To avoid overexposure, open windows and doors or use other means to ensure fresh air
•   entry during application and drying.
• Avoid contact with eyes and skin.
• Wash hands after using.
• FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
• Dispose of contents/plastic cans in accordance with national regulations.
• Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.